IPC707 244-707-000-012 signal conditioner

From the vibro-meter® product line 

• For CAxxx piezoelectric accelerometers and CPxxx dynamic pressure sensors 

• Configurable high-pass and low-pass filters (independent of transfer function)

 • Frequency range: 0.5 Hz to 20 kHz 

• Optional integrator to produce a velocity output 

• pC to µA transfer function for current-signal transmission over longer distances 

• pC to mV transfer function for voltage-signal transmission over shorter distances

 • Certified for use in potentially explosive atmospheres

 • Optional diagnostic circuitry to detect sensor, cabling and/or signal conditioner problems

 • Suitable for use in functional safety contexts: SIL 2 in accordance with IEC 61508 and PL c Cat 1 in accordance with ISO 13849

NEW AND ORIGIN ITEM IN STOCK

WITH ONE YEAR WARRANTY 

Hope anyone enquire from us,pls click this sales6@nseauto.com
1. lower your support costs 
2, Provide on-going availability of automation replacement parts  
Quantity available: 1 
Warranty: 12 months. 
Lead time: 1-2 working days.
Terms of payment:T/T and Western Union.
Courier partners: DHL, UPS, TNT, FedEx and EMS.
Technical specification, manuals and data sheets

SPECIFICATIONS:

Environmental
Temperature range
• Sensor : −40 to 180°C (−40 to 356°F) operating.
180 to 220°C (356 to 428°F) short-term survival for 2 hours max.
• Sensor and cabling : Temperature for use in an Ex Zone: see Potentially explosive
atmospheres on page 4
• Cabling, connector and optional
protection
: −40 to 200°C (−40 to 392°F)
Measurement drift
• Sensor and cabling with a total
system (chain) length of 1, 5 or 10 m
: <5% for −30 to 150°C (−22 to 302°F)
Pressure between sensor tip and body : 6 bar (100 psid) max.
Protection rating
(according to IEC 60529)
: The head of the sensor (sensor tip and integral cable) is rated IP68
Vibration
(according to IEC 60068-2-26)
: 5 g peak between 10 and 500 Hz
Shock acceleration
(according to IEC 60068-2-27)
: 15 g peak (half sine-wave, 11 ms duration)

Sensor construction : Wire coil Ø8 mm, PPS (polyphenylene sulfide) high-performance
thermoplastic tip, crimped to a stainless-steel body (AISI 316L)
Integral and extension cables : FEP covered 70 Ω coaxial cable, Ø3.6 mm
Connectors : Self-locking miniature coaxial connectors.
Note: When connecting, these should be hand-tightened until
locked.
Optional protection
• Flexible stainless-steel hose
(protection tube) with
FEP sheath (extruded fluorinated
ethylene propylene)
: The combination of stainless-steel hose with FEP sheath provides
sealed (leak-tight) mechanical and electrically insulated
protection.
Note: The FEP sheath also provides resistance to almost all
chemicals and low permeability to liquids, gases and moisture,
while being flexible, low friction and mechanically tough.