RPS6U Vibration 200-582-300-013(DC) Rack Power Supply

Description:

The VM600Mk2/VM600 RPS6U rack power supplies
are designed for use in the VM600Mk2/VM600
series of machinery protection systems and
condition and performance monitoring systems,
from Meggitt’s vibro-meter® product line.
A VM600Mk2/VM600 RPS6U rack power supply is
installed in the front of a VM600Mk2/VM600 ABE04x
system rack (19″ system racks with a standard
height of 6U) and connects via two high-current
connectors to the VME bus of the rack’s
backplane. The RPS6U power supply provides
+5 VDC and ±12 VDC to the rack itself and all
installed modules (cards) in the rack via the rack’s
backplane.

Either one or two VM600Mk2/VM600 RPS6U rack
power supplies can be installed in a VM600Mk2/
VM600 ABE04x system rack. A rack with one
RPS6U power supply (330 W version) supports the
power requirements for a full rack of modules
(cards) in applications with operating
temperatures up to 50°C (122°F).
Alternatively, a rack can have two RPS6U power
supplies installed in order to either support rack
power supply redundancy or in order to supply
power to the modules (cards) non-redundantly
over a wider range of environmental conditions.
A VM600Mk2/VM600 ABE04x system rack with two
RPS6U power supplies installed can operate
redundantly (that is, with rack power supply
redundancy) for a full rack of modules (cards).
This means that if one RPS6U fails, the other will
provide 100% of the rack’s power requirement so
that the rack will continue to operate, thereby
increasing the availability of the machinery
monitoring system.
Note: This is known as a redundant RPS6U rack
power supply configuration.
A VM600Mk2/VM600 ABE04x system rack with two
RPS6U power supplies installed can also operate
non-redundantly (that is, without rack power
supply redundancy). Typically, this is only
necessary for a full rack of modules (cards) in
applications with operating temperatures above
50°C (122°F), where RPS6U output power derating
is required.
Note: Even though two RPS6U rack power supplies
are installed in the rack, this is not a redundant
RPS6U rack power supply configuration.

Datasheet Link:

RPS6U Vibration 200-582-300-013(AC) Rack Power Supplyr Datasheet