• 16 individually configurable dynamic channels
• 16 parallel programmable anti-aliasing filters and ADCs
• First 4 channels also configurable as tacho inputs
• Last 12 channels also configurable as process values
• VME architecture
• Configurable Synchronous and Asynchronous sampling
• High resolution 3200- line FFT
• 10 fully configurable frequency bands per channel
• 6 configurable alarms per band with hysteresis deadbands
• Schedule, ‘on-alarm’ and ‘on exception’ based logging
• Ethernet and Serial RS-485 communication options
• On-board buffer storage
• Status indication by 3-colour LED on front panel
• Live insertion / removal of cards with automatic configuration
• Voltage output signal: 100 or 500 mV/ g
• Frequency response:
0.5 to 14 000 Hz (100 mV/ g versions)
0.2 to 3 700 Hz (500 mV/ g versions)
• Temperature range:
−55 to 120 °C (100 mV/ g versions)
−55 to 90 °C (500 mV/ g versions)
• Isolated electronics with internal shield for reduced noise and improved bias-voltage stability
• Ground isolated from case
• Available as a sensor only or with an integral cable
• Available in standard versions and Ex versions certified for use in hazardous areas
EPRO PR6424/003-030 16mm Eddy Current Sensor, Sleeve Thread M18x1.5, Without Armored Cable, Total Sensor Length is 82.5mm, With Adaptor Plug, Total Cable Length is 8m, Lemo Cable End.
TRICONEX 4000212-002 TRIDENT EXTENDER. The Trident supports a range of modules for applications with low point counts and distributed I/O. This section provides detailed specifications for each product in the Trident family
The basic unit 07KT98 works either as
• bus master in the decentralized automation system Advant Controller 31 or as
• slave (remote processor) in the decentralized automation system Advant Controller 31 or as
• stand-alone basic unit.
The basic unit is powered by 24 V DC.